Commercial Product Line

AIR BARRIER PRODUCTS
Vapor Permeable
Poly-Wall AirLok Flex VP	Elastomeric, spray applied, low VOC, tough rubber membrane, applied above 50ºF; UV stable 1+ years
Non-Permeable
Poly-Wall AirLok	Non-elastomeric, spray applied, hard tile glaze-like membrane, applied -20º to 120º F, UV stable for 1+ years
Poly-Wall AirLok Flex	Elastomeric, spray applied, tough rubber membrane, applied -20º to 120º F, UV stable up to 6 months
Poly-Wall AirLok Flex with ProBan	Elastomeric, spray applied, tough rubber membrane, includes ProBan mold inhibitor, applied -20º to 120º F, UV stable up to 6 months
NEW! Poly-Wall AirLok Flex 100 VOC	100 VOC, Elastomeric, spray applied, tough rubber membrane, applied -20º to 120º F, UV stable up to 6 months
NEW! Poly-Wall AirLok Flex 200 VOC	200 VOC, Elastomeric, spray applied, tough rubber membrane, applied -20º to 120º F, UV stable up to 6 months
NEW! Poly-Wall AirLok Flex 400 VOC	400 VOC Elastomeric, spray applied, tough rubber membrane, applied -20º to 120º F, UV stable up to 6 months
Poly-Wall Self-Adhesive Sheet Membrane	Wide width, available in 25, 40, or 60 mil thickness, self- adhering membrane, asphalt adhesive with high strength cross laminated polyethylene face, applied 40ºF and above

WATERPROOFING
Poly-Wall Commercial Stretch	Elastomeric, spray applied, tough rubber membrane, applied -20º to 120º F, designed for below-grade, positive side waterproofing on concrete and masonry walls, UV stable 3+ months
Poly-Wall Self-Adhesive Sheet Membrane	Wide width, available in 25, 40, or 60 mil thickness, asphalt adhesive with high strength cross laminated polyethylene face, applied 40ºF and above

DAMPPROOFING
Poly-Wall PRO 1000	Non-elastomeric, spray applied, hard high gloss finish membrane, applied -20º to 120º F, UV stability good, designed for below-grade, positive and negative side on concrete and masonry walls

SPECIALTY PRODUCTS
Poly-Wall Commercial PRO 3100	Non-elastomeric, spray applied, hard high gloss finish membrane, applied -20º to 120º F, UV stability good, designed as above-grade interior finish
Poly-Wall Clear Seal W-100	Non-elastomeric, spray applied, medium gloss, hard, low VOC, applied above 50ºF, UV stable, sealer for concrete, CMU and pavers
Poly-Wall Clear Seal W-100 with ProBan	Non-elastomeric, spray applied, medium gloss, hard, low VOC, applied above 50ºF; UV stable, includes ProBan mold inhibitor additive. Use to seal concrete, CMU, pavers and wood joists or on cavity walls for extra protection against mold.
System Accessories
Poly-Wall Self-Adhering Flashing	Narrow width, available in 25 mil thickness, self-adhering membrane, asphalt adhesive with high strength cross laminated polyethylene face. applied 40ºF and above
Poly-Wall Activator	Cold weather liquid adhesive booster for membrane strips and sheets; allows for lower temperature application
Poly-Wall Hole Filler & Poly-Wall Fiber Flash	Elastomeric caulk, gun applied, tough rubber- like gloss finish, low VOC, applied -20º to 120º F, UV stable, designed for both above-grade and below-grade use
Quick Grip Building Envelope Adhesive	All temperature liquid adhesive. Industrial-grade aerosolized adhesive in a portable spray system. Formulated to adhere protection courses, drainage composites, insulation, air & vapor barrier membranes, waterproofing membranes, and thru-wall flashings to a variety of substrates. A fast & economical solution to most building envelope component adhesive requirements.(*accessories sold separately)
Injection Products (system components sold separately)*
Poly-Wall Urethane Injection	Expansive hydrophobic polyurethane, low VOC, installed above 50ºF, fast cure. Typically used to stop water leaks coming through cracked or honeycombed concrete, voids between wall and floor, wall and ceilings, expansion joints, cold joints, and pipe intrusions.
Poly-Wall Port & Surface Seal 5/30	A two-component, solvent free, moisture-insensitive, smooth paste epoxy adhesive. A very rapid-curing sealer for more efficient pressure injection grouting of cracks. Use to seal cracks and to secure injection ports in structural concrete and wood trusses prior to pressure injection grouting. Applies in 5 minutes and dries in 30 minutes.
Poly-Wall Port & Surface Seal 2/20	Same properties as Port & Surface Seal 5/30 except applies in 2 minutes and dries in 20 minutes.
Poly-Wall Injection Epoxy HV (High Viscosity)	A two-component, 100% solid, moisture insensitive epoxy resin system with a high modulus of elasticity. Meets ASTM C-881 specifications. It is unique in that it rapidly thickens in the crack so that material cannot leak out the back for more than 10-20 minutes.
Poly-Wall Injection Epoxy LV (Low Viscosity)	A two-component, 100% solid, moisture insensitive epoxy resin system with a high modulus of elasticity. Meets ASTM C-881 specifications. It is unique in that it rapidly thickens in the crack so that material cannot leak out the back for more than 10-20 minutes.