Residential Product Line

WATERPROOFING

Poly-Wall Stretch Elastomeric, spray applied, tough rubber membrane, applied -20º to 120º F, designed for below-grade, positive side waterproofing on concrete and masonry walls, UV stable 3+ months

Poly-Wall Self-Adhesive
Sheet Membrane Wide width, available in 25, 40, or 60 mil thickness, self- adhering membrane, asphalt adhesive with high strength cross laminated polyethylene face, applied 40ºF and above

DAMP PROOFING

Poly-Wall PRO 1000 Non-elastomeric, spray applied, hard high gloss finish membrane, applied -20º to 120º F, UV stability good, designed for below-grade, positive and negative side on concrete and masonry walls

SPECIALTY PRODUCTS

Poly-Wall Clear Seal W-100 Non-elastomeric, spray applied, medium gloss, hard, low VOC, applied above 50ºF, UV stable, sealer for concrete, CMU and pavers

Poly-Wall Clear Seal W-100
with ProBan Non-elastomeric, spray applied, medium gloss, hard, low VOC, applied above 50ºF; UV stable, includes ProBan mold inhibitor additive. Use to seal concrete, CMU, pavers and wood joists or on cavity walls for extra protection against mold.

System Accessories

Poly-Wall Self-Adhering Flashing Narrow width, available in 25 mil thickness, self-adhering membrane, asphalt adhesive with high strength cross laminated polyethylene face. applied 40ºF and above

Poly-Wall Activator Cold weather liquid adhesive booster for membrane strips and sheets; allows for lower temperature application

Poly-Wall Hole Filler &
Poly-Wall Fiber Flash Elastomeric caulk, gun applied, tough rubber- like gloss finish, low VOC, applied -20º to 120º F, UV stable, designed for both above-grade and below-grade use

Quick Grip Building Envelope Adhesive All temperature liquid adhesive. Industrial-grade aerosolized adhesive in a portable spray system. Formulated to adhere protection courses, drainage composites, insulation, air & vapor barrier membranes, waterproofing membranes, and thru-wall flashings to a variety of substrates. A fast & economical solution to most building envelope component adhesive requirements.(*accessories sold separately)

Injection Products (*system components sold seperately)

Poly-Wall Urethane Injection Expansive hydrophobic polyurethane, low VOC, installed above 50ºF, fast cure. Typically used to stop water leaks coming through cracked or honeycombed concrete, voids between wall and floor, wall and ceilings, expansion joints, cold joints, and pipe intrusions.

Poly-Wall Port & Surface Seal 5/30 A two-component, solvent free, moisture-insensitive, smooth paste epoxy adhesive. A very rapid-curing sealer for more efficient pressure injection grouting of cracks. Use to seal cracks and to secure injection ports in structural concrete and wood trusses prior to pressure injection grouting. Applies in 5 minutes and dries in 30 minutes.

Poly-Wall Port & Surface Seal 2/20 Same properties as Port & Surface Seal 5/30 except applies in 2 minutes and dries in 20 minutes.

Poly-Wall Injection Epoxy HV
(High Viscosity)
A two-component, 100% solid, moisture insensitive epoxy resin system with a high modulus of elasticity. Meets ASTM C-881 specifications. It is unique in that it rapidly thickens in the crack so that material cannot leak out the back for more than 10-20 minutes.

Poly-Wall Injection Epoxy LV
(Low Viscosity) A two-component, 100% solid, moisture insensitive epoxy resin system with a high modulus of elasticity. Meets ASTM C-881 specifications. It is unique in that it rapidly thickens in the crack so that material cannot leak out the back for more than 10-20 minutes.

WATERPROOFING
Poly-Wall Stretch	Elastomeric, spray applied, tough rubber membrane, applied -20º to 120º F, designed for below-grade, positive side waterproofing on concrete and masonry walls, UV stable 3+ months
Poly-Wall Self-Adhesive Sheet Membrane	Wide width, available in 25, 40, or 60 mil thickness, self- adhering membrane, asphalt adhesive with high strength cross laminated polyethylene face, applied 40ºF and above

DAMP PROOFING
Poly-Wall PRO 1000	Non-elastomeric, spray applied, hard high gloss finish membrane, applied -20º to 120º F, UV stability good, designed for below-grade, positive and negative side on concrete and masonry walls

SPECIALTY PRODUCTS
Poly-Wall Clear Seal W-100	Non-elastomeric, spray applied, medium gloss, hard, low VOC, applied above 50ºF, UV stable, sealer for concrete, CMU and pavers
Poly-Wall Clear Seal W-100 with ProBan	Non-elastomeric, spray applied, medium gloss, hard, low VOC, applied above 50ºF; UV stable, includes ProBan mold inhibitor additive. Use to seal concrete, CMU, pavers and wood joists or on cavity walls for extra protection against mold.
System Accessories
Poly-Wall Self-Adhering Flashing	Narrow width, available in 25 mil thickness, self-adhering membrane, asphalt adhesive with high strength cross laminated polyethylene face. applied 40ºF and above
Poly-Wall Activator	Cold weather liquid adhesive booster for membrane strips and sheets; allows for lower temperature application
Poly-Wall Hole Filler & Poly-Wall Fiber Flash	Elastomeric caulk, gun applied, tough rubber- like gloss finish, low VOC, applied -20º to 120º F, UV stable, designed for both above-grade and below-grade use
Quick Grip Building Envelope Adhesive	All temperature liquid adhesive. Industrial-grade aerosolized adhesive in a portable spray system. Formulated to adhere protection courses, drainage composites, insulation, air & vapor barrier membranes, waterproofing membranes, and thru-wall flashings to a variety of substrates. A fast & economical solution to most building envelope component adhesive requirements.(*accessories sold separately)
Injection Products (system components sold seperately)*
Poly-Wall Urethane Injection	Expansive hydrophobic polyurethane, low VOC, installed above 50ºF, fast cure. Typically used to stop water leaks coming through cracked or honeycombed concrete, voids between wall and floor, wall and ceilings, expansion joints, cold joints, and pipe intrusions.
Poly-Wall Port & Surface Seal 5/30	A two-component, solvent free, moisture-insensitive, smooth paste epoxy adhesive. A very rapid-curing sealer for more efficient pressure injection grouting of cracks. Use to seal cracks and to secure injection ports in structural concrete and wood trusses prior to pressure injection grouting. Applies in 5 minutes and dries in 30 minutes.
Poly-Wall Port & Surface Seal 2/20	Same properties as Port & Surface Seal 5/30 except applies in 2 minutes and dries in 20 minutes.
Poly-Wall Injection Epoxy HV (High Viscosity)	A two-component, 100% solid, moisture insensitive epoxy resin system with a high modulus of elasticity. Meets ASTM C-881 specifications. It is unique in that it rapidly thickens in the crack so that material cannot leak out the back for more than 10-20 minutes.
Poly-Wall Injection Epoxy LV (Low Viscosity)	A two-component, 100% solid, moisture insensitive epoxy resin system with a high modulus of elasticity. Meets ASTM C-881 specifications. It is unique in that it rapidly thickens in the crack so that material cannot leak out the back for more than 10-20 minutes.